Basement Waterproofing Services

Any Problem. Anytime. Anywhere.

Professional Well Pump Installation Services

Your well depth, water demand, and pipe configuration determine exactly which pump your property needs and how it should be installed.

TJ’s Plumbing & Heating, Inc. has spent over 30 years matching homeowners across Western New York and Northwestern Pennsylvania with well pump installations built around those specifics — sized, sourced, and installed for your property alone.

Why Choose TJ's Plumbing & Heating, Inc. as Your Well Pump Installation Company

A well pump installation determines how reliably your entire water supply performs — for years, sometimes decades. The right outcome depends on precise calculations around well depth, water demand, pressure tank compatibility, and electrical load.

Choosing the right company to handle that work matters just as much as choosing the right equipment.

30+ Years of Local Performance: Since 1990, our team has built hundreds of years of combined experience installing systems across Western New York and Northwestern Pennsylvania, with direct familiarity with the mineral content, water table fluctuations, and well conditions specific to Erie and Jamestown.

24/7 Emergency Availability, Same-Day Response: When a failed system leaves your home without water, same-day around-the-clock availability means supply is restored as quickly as possible.

Licensed Master Plumbers, Code-Compliant Installation: Every system is installed by licensed master plumbers (No. P2600019), following code-compliant practices built around safety and long-term performance.

High-Performance Equipment: We source pumps and pressure tanks from industry-leading manufacturers, including Goulds Pumps, Liberty Pumps, and Zoeller — brands proven to hold up under years of demanding use.

100% Satisfaction Guarantee: Every installation is backed by a full satisfaction guarantee, so your water system works the way it should from day one.

Free Estimates: No-cost assessments and low diagnostic fees make it easy to move forward with confidence before any water treatment work begins.
Flexible Financing Options: A full well system installation is a significant investment. Financing options are available to help you move forward with a reliable solution on a timeline that works for you.

Get Your Free Estimate Today

Well Pump Installation Services

The right well pump installer makes the difference between a system that performs for decades and one that struggles from the start — and that starts with building the installation around your property’s actual conditions: well depth, water demand, and the right equipment for both.

If your current system has already been showing signs of strain, our well pump repair services can determine whether repair or full replacement is the right next step.

Submersible Well Pump Installation

Submersible pumps operate fully submerged at the bottom of the well, making them the reliable choice for deep wells and high-demand households.

Our submersible well pump installation process covers motor sizing based on well yield and static water level, drop pipe selection rated for the installation depth, watertight electrical connections, and torque arrestors to keep the pump stable during operation.

Every component is tested before the well cap is sealed.

Jet Well Pump Installation

Jet pumps work by creating suction to draw water up from shallow wells, which means the entire system — from the ejector assembly to the pressure tank — has to be calibrated together.

Our jet well pump installation includes suction line sizing, ejector nozzle and venturi selection, pressure switch setting, and priming verification to confirm the system pulls water consistently before we leave the property.

Well Pump Replacement

A pump that’s underperforming or has failed outright tells you something about the whole system — not just the pump.

Our well pump replacement process starts with a full evaluation of your existing setup, including pressure tank condition, electrical capacity, and pipe integrity, before a replacement is selected. The right pump goes in size to your current water demand, with every connected component checked and cleared.

How We Perform Pressure Tank Installation

A well pump working without a properly sized pressure tank wears out faster than it should.

The pressure tank absorbs system demand between pump cycles, and when it’s undersized, miscalibrated, or failing, the pump runs constantly — shortening its lifespan and driving up energy costs.

Pressure Tank Installation

Pressure tank installation starts with calculating the correct tank size based on your pump’s flow rate, the number of fixtures in your home, and your household’s peak demand periods. We select tanks with the appropriate drawdown capacity and pre-charge pressure for your system, then install them with properly rated fittings and shutoff valves for future serviceability.

System Calibration and Testing

A pressure tank installed without proper calibration leaves the system guessing.

Our calibration process covers pre-charge air pressure verification using a precision gauge, pressure switch cut-in and cut-out adjustment, drawdown testing to confirm the tank is delivering the correct volume between cycles, and a full fixture flow check to verify balanced pressure throughout the home. Every reading is documented before we consider the installation complete.

If anything surfaces during calibration that points to a drainage or supply line issue, our water leak detection and repair service can be coordinated before the system is handed back to you.

Our Well Pump Installation Process

Every well system is different — depth, yield, demand, and existing infrastructure all shape what goes in and how. Here’s how we approach every installation from start to finish.

1. System Assessment

Before any equipment is selected, our team measures well depth, static and pumping water levels, well yield in gallons per minute, and your household’s peak water demand. Existing pressure tanks, pipe diameter, and electrical capacity are evaluated at this stage, too, because every component downstream affects what the pump needs to handle. If the assessment reveals signs of repiping needs or corroded supply lines, we flag those before installation begins and can coordinate repiping as part of the same project scope.

2. Equipment Selection

Pump type, horsepower, and flow rate are matched to your well’s specific yield and your property’s demand profile. Submersible pumps, jet pumps, and pressure tank sizing are selected based on the assessment data — not off a standard recommendation sheet. Motor efficiency ratings and manufacturer compatibility with your existing system factor into the final selection.

3. Installation and Setup

Drop pipe, safety rope, torque arrestors, and watertight electrical connections are all installed to manufacturer specifications and local code requirements. Wiring is run through a properly rated control box, and the pressure tank is connected with correctly sized fittings before the system is pressurized for the first time.

4. Testing and Performance Check

Flow rate is measured at the wellhead and at interior fixtures to confirm delivery across the full system. Pressure switch cut-in and cut-out points are verified, drawdown volume is tested against the tank’s rated capacity, and cycle rate is monitored to confirm the pump runs within its designed parameters before the job is closed out.

Get Your Well Pump Installed the Right Way

A well system built on the right foundation delivers reliable water for decades.

TJ’s Plumbing & Heating, Inc.’s well pump installation services across Western New York and Northwestern Pennsylvania start with an honest assessment and end with a system you can count on. Give us a call or reach out online, and let’s get your water flowing the right way.

Book a Service Online

Our Locations

TJ’s Plumbing & Heating, Inc. serves Western New York and Northwestern Pennsylvania across three locations — bringing the same standard of service to every corner of the region.

Erie, PA

1406 East 28th Street, Erie, PA 16504

Warren, PA

Jamestown, NY

1005 Allen Street, Jamestown, NY

Dunkirk, NY

Ferdonia, NY

Fairview, PA (Coming Soon)

6550 West Ridge Road, Fairview, PA 16506

Frequently Asked Questions

How do I know what size well pump I need?

Household water demand, well depth, and required flow rate in gallons per minute are the three variables that determine the right pump size. An on-site system evaluation matches those numbers to a unit rated for your specific conditions.

What is the difference between submersible and jet pumps?

Submersible pumps sit inside the well casing below the water line, making them the standard choice for deep wells and the more efficient option overall. Jet pumps mount above ground and draw water up through suction, which works reliably for shallow wells but loses effectiveness beyond 25 feet of depth.

How long does a well pump installation take?

Most installations wrap up within a few hours. Submersible pump replacements requiring the drop pipe and wiring to be pulled from depth, or jobs involving new pressure tank installation, run longer — a confirmed timeline gets established before work begins.

When should I replace my well pump instead of repairing it?

A pump past the 10-year mark with recurring failures, declining output, or repair costs approaching half the price of a new unit is a strong replacement candidate. Continuing to repair an aging pump typically costs more over two to three years than a single replacement does upfront.

Does installing a new pressure tank improve performance?

Yes. A correctly sized pressure tank maintains consistent water pressure throughout the home, reduces how often the pump cycles on and off, and extends the pump’s service life by lowering mechanical wear. An undersized tank produces the opposite effect regardless of pump condition.